Search results

If anybody is looking to replace their windshield wiper blade plus the attachments here are the parts numbers. WIPER BLADE 18" CURVED 33116 WIPER ARM AFI 14" X 20" 33110A Both are available from Formula or a decent marine supply shop.

Last weekend during Irma my 310 SS lost power. The fridge defrosted and the water leaked into the wood trim between the base of the fridge and the microwave. Images are attached but has anybody replaced this piece as to me it looks attached to the base of the fridge shelf and is trim, not...

Alas over the weekend my '07 310 SS took somewhat of a cosmetic battering down here in Clearwater. FL The bimini top is badly torn but more importantly the cover, from infront of the screen to the swim platform has torn in half. Has anybody recently purchased one of these from TAG or have you...

For owners who wonder where this area is and what it looks like here are two images which may help. The previous owner to myself flooded his 'cubby storage area' by not looking at why this area needs emptying and it ruined his carpet. I inspect mine every three months and after some serious...

After ten years of life, but not use, my battery charger has failed. Anybody ever had to lift the engine hatch manually, good tried it is heavy even with two people. No electrical bypass on the 310 ss for no power, even if you try to bypass. Oh well a new charger for $700 plus is on its way. No...

Attached are a few images of my deck carpet. Both sides shown. Any questions ask away.

Just a heads up for those having any small leaks from their sea strainers. After 400 or so hours or six years these should be replaced and here is the reason why....rust. Dont forget the hoses too which split over time.

This is the hull of my 2007 Formula 310 SS as seen yesterday when hauled out of the water. The fibreglass damage is from the boat lift i beam and chalks. I swear this lift has caused me more issues than anything on the boat, including manifolds, exhausts, interior trim, Smartcraft improvements...

The old Kenwood KTS 300 MR has to go, along with the CD Changer (never used it) as do four speakers...tweeters have rotted away due to salt air. I have two options re head unit plus two deck remotes, one at the helm and one on the swim platform of the 310 SS. Option one is a Fusion RA-70n radio...

My Sunsport 310 (MY 2007) decided today to really foul up boating plans. The bilge pump failed as a seacock sprung a leak, after the detailer failed to fully tighten up the fastener to the sea strainer. Much bailing by hand in Dunedin Marina and four full wet and dry vacuum containers worth and...

For some time now I have been having issues with the alarm in my bilge and the pump refusing to turn on automatically after rain here in sunny Fla. I discovered this weekend that the wiring has corroded beyond repair and needs replacing. Not an issue but anybody else had a similar issue on a...

Any Gulf Coast Florida owners doing much re the passing tropical storm over the next 24-48 hrs. With winds of around 35 mph and some rains it isn't much to cause a sleepless night but what are you doing if anything?

How many owners who use their boats off shore on on the bigger Great lakes have more than a VHF, a couple of life jackets and two fire extinguishes aboard their boats? Do you have a ditch bag and whats in it?

How many fellow boaters have invested in EPIRBS, hand held VHF radios and additional safety equipment beyond the usual flares, fire extinguishers and PFD's? Ditch bags whats in yours?

Brethren, I have an 07 310 SS with 420 hours of engine use. Having spent quite heavily this year getting things just right I am now faced with a possible bill of $2400 plus for two of the above. My question is, how long do these items last, is aftermarket better than OEM spec from Mercury and...

Brethren, I have an 07 310 SS with 420 hours of engine use. Having spent quite heavily this year getting things just right I am now faced with a possible bill of $2400 plus for two of the above. My question is, how long do these items last, is aftermarket better than OEM spec from Mercury and...

I have decided to plasDECK the swim platform and entrance to my boat, and the job although labor intensive now looks great but offers a better appeal than the standard option on a 2007 boat. The work was done by Jonathan at Underway Marine Flooring in Dunedin FL and here are some images. The...

Having purchased a 310 SS in September, I decided this winter to return the hull to its original condition, removing the very low quality paint job done by the previous owner who clearly knew nothing about fibreglass, Imron or hulls. Tim Bohn in Port Richie Florida has been busy removing the...

Greeting fellow Formula Fans. I have recently purchased a 2007 310 SS, with 420 hours on her and in need of a little TLC. More cosmetic than mechanical although the drives, bllge and electrics need a good going over. Am having removed a poor hull paint job so well post pictures as the work...