New Smart IC Led Lights

[admin1]

My old ones finally failed after 2 seasons. Replaced them with the new Smart ic Led version. Many program styles available. Here are a few.







Last years in action at Nugget Atlantic City

 

[Pegasus]

that's cool i like it.
How does it hold up in the water and weather.

 

[admin1]

Lasted all season. Will no more soon!

 

[Alindquist]

are they just tapped to the gunnel or did you come up with a mounting system.

 

[admin1]

These are the strips that are in the silicone tubing. Very hard to find something that will stick to Silicone. I fount a 3M tape that was $150 for a 50 yard roll. Has to different sides.. one that bonds to Silicone and the other to Acrylic. And it holds up good. Did have a few spots that let lose but used some locktite super glue.

 

[sporty2k]

can you post a link to the 3m roll you found?

 

[admin1]

Will have to get you the part number off of the roll this weekend.

 

[sporty2k]

any luck finding the part number?

 

[admin1]

3M 9731 High Performance Double Coated Tape - 1" x 36 yds keep some crazy glue handy for the curves and weak spots.

 

[sporty2k]

thanks - got the roll and ready to install. One last question - can you tell me exactly how you powered? Where did you enter the hull? How big of a hole, how did you seal etc. Thanks again. Excited to get this done for 4th of July!

 

[admin1]

If you get the 12volt set you can power from the boat batteries. I ran power from a dash switch into the bilge ran the 12v to the controller. I cut the wire from the power supply 12v side and solder n shrink tube to switched 12volt supply. You also want an in line fuse! I used 2amp.