SabrToothSqrl
Well-known member
if you aren't breaking seat brackets, do you even FasTech?!
ALL IN PROPS OUT!
ALL IN PROPS OUT!
Seat Brackets to be fixed
- Thread starter SabrToothSqrl
- Start date
SabrToothSqrl
Well-known member
all 4 bolts on the starboard side were bent! good times!
SabrToothSqrl
Well-known member
Got Port back together, looked over and Starboard is also Fracked. So I cleaned up the brackets and will take it to the welding shop Monday.
https://regalmetalworks.com/ did the welding
I used
https://www.harborfreight.com/complete-sanding-disc-kit-43029.html
to clean up the bracket. You don't want to use a metal wire wheel that's not stainless - it leaves metal on the stainless that rusts. I prefer these sanding discs.
https://regalmetalworks.com/ did the welding
I used
https://www.harborfreight.com/complete-sanding-disc-kit-43029.html
to clean up the bracket. You don't want to use a metal wire wheel that's not stainless - it leaves metal on the stainless that rusts. I prefer these sanding discs.
Last edited: