LED's
- Thread starter Jeff h
- Start date
Formula Tenn
New member
I have most of them but there are several options to choose from. the cabin overhead lites and anchor lite are all a ba9s base. for inside the cabin be sure to use a warm white led. here are the ones I used (cabin overheads, 1 per fixture): http://www.superbrightleds.com/more...power-led-rectangle-pcb-lamp-w-ba9s-base/837/
it can simply lay inside the lens or you 2-sided tape it up if you prefer. for the anchor light this is what i'm currently using: http://www.superbrightleds.com/moreinfo/ba9s-ba7s/ba9s-led-bulb-6-led-360-degree/8/ but this might be a better choice: http://www.superbrightleds.com/moreinfo/ba9s-ba7s/ba9s-led-bulb-9-led-tower/9/ the cockpit lights are a ba15d base and they come in colors so I went with blue and they look awesome. I got them from LEDlight.com and the part number was a 23598bba15d (this bulb is blue) you might wanna research for a bulb that is SLIGHTLY shorter, mine actually touch the lens. they look fine, aren't too bright or dim and LEDs don't get hot so it isn't a problem. I think your arch lights are also a ba15d base but I replaced my fixtures so not sure about that. I also modified them to be either white or red. the floor lights in the cabin can also be done a couple of ways. superbright has a complete fixture (again, warm white on the inside) that works really well if a drunk bastard smashes the one at the top companionway step: http://www.superbrightleds.com/moreinfo/tail-brake-turn/2-smd-led-license-plate-light/250/ and I cant seem to locate the replacement bulb number if you are lucky enough to only need a bulb. the two overhead accent lights at the dinette are a part number WWHP6-DAC. I think the pins might have to be trimmed a bit but I don't really remember. so far those are the only bulbs I've changed out to LED. hope that helps
it can simply lay inside the lens or you 2-sided tape it up if you prefer. for the anchor light this is what i'm currently using: http://www.superbrightleds.com/moreinfo/ba9s-ba7s/ba9s-led-bulb-6-led-360-degree/8/ but this might be a better choice: http://www.superbrightleds.com/moreinfo/ba9s-ba7s/ba9s-led-bulb-9-led-tower/9/ the cockpit lights are a ba15d base and they come in colors so I went with blue and they look awesome. I got them from LEDlight.com and the part number was a 23598bba15d (this bulb is blue) you might wanna research for a bulb that is SLIGHTLY shorter, mine actually touch the lens. they look fine, aren't too bright or dim and LEDs don't get hot so it isn't a problem. I think your arch lights are also a ba15d base but I replaced my fixtures so not sure about that. I also modified them to be either white or red. the floor lights in the cabin can also be done a couple of ways. superbright has a complete fixture (again, warm white on the inside) that works really well if a drunk bastard smashes the one at the top companionway step: http://www.superbrightleds.com/moreinfo/tail-brake-turn/2-smd-led-license-plate-light/250/ and I cant seem to locate the replacement bulb number if you are lucky enough to only need a bulb. the two overhead accent lights at the dinette are a part number WWHP6-DAC. I think the pins might have to be trimmed a bit but I don't really remember. so far those are the only bulbs I've changed out to LED. hope that helps
Formula Tenn
New member
no problem just let us know how you make out, others might can benefit from your input that's why this forum is awesome!
that's why this forum is awesome!