Hi all,
Fuel gauge not working, mechanical or on the vessel view. reads Empty.
Its a KUS sending unit SSS10. Black and pink wire connected to black and red wire in the bilge. Behind the helm it looks like all Nema 2 wire stuff. 3 wires going to the gauge all inline with trim gauges, tach's etc..
(lost).
So how do I ground it out to see if its the sender or the gauge? I also see now that I disconnected it the calibration is gone..And i know i have at least a half tank.
2013 Volvo DPS Joystick 380 HP.
gauge looks like it was engraved in 2015 by someone. may have already been replaced.
Any help appreciated.
Fuel gauge not working, mechanical or on the vessel view. reads Empty.
Its a KUS sending unit SSS10. Black and pink wire connected to black and red wire in the bilge. Behind the helm it looks like all Nema 2 wire stuff. 3 wires going to the gauge all inline with trim gauges, tach's etc..
(lost).
So how do I ground it out to see if its the sender or the gauge? I also see now that I disconnected it the calibration is gone..And i know i have at least a half tank.
2013 Volvo DPS Joystick 380 HP.
gauge looks like it was engraved in 2015 by someone. may have already been replaced.
Any help appreciated.
Last edited: